Fleet costs rarely rise for one large reason. It is usually a dozen small leaks, each of which looks trivial on its own: ten minutes of idling per shift, one empty run a week, a refuelling forty litres smaller than the card transaction, a service done five thousand kilometres late.
Telematics does not cut costs. A decision made on the data does — and that part, not the technology, determines the outcome of a rollout.
Where the money actually leaks
In a typical transport fleet the cost structure looks similar everywhere: fuel is usually 30–40%, driver wages are the second largest line, then maintenance, insurance and depreciation. Telematics has real leverage on four of them.
Fuel. Three independent sources of loss: excess consumption from driving style, idling, and shrinkage — from leaks through to siphoning. Each needs different measurement and a different response.
Idling. The most underrated line. An engine running while parked burns fuel without covering distance, and in refrigerated, construction and urban distribution fleets that can reach a low double-digit share of total consumption. It is also the fastest to change: measurement, communication and a regular report are enough.
Empty running. Unladen kilometres are cost without revenue. Telematics shows the scale; reducing it requires a change in planning, not in monitoring.
Reactive maintenance. A repair after failure costs several times more than a scheduled service, once downtime is counted. Engine hours and mileage let you move from a calendar to actual wear.
How telematics reduces fleet fuel costs
Fuel savings come from five mechanisms. Each one has its own data source, its own report in Wialon and its own person who acts on it. The figures below come from the US Department of Energy’s fueleconomy.gov and describe light vehicles. Your own fleet’s numbers come from your baseline (Step 1).
Idling
An engine running at a standstill burns fuel and covers no distance. A light vehicle uses roughly 1 to 2 litres an hour while idling, depending on engine size and air conditioning (fueleconomy.gov).
What Wialon shows: every stop with the engine running, with place, start time and duration, taken from the ignition input or CAN data. With driver identification (a card, key fob or the driver app) the same list is split per driver. An idling notification fires when a stop runs past the threshold you set.
What to do: set the threshold per vehicle group and review idle minutes per shift every week. Step 4 below covers how to run this.
Speeding and harsh driving
Speeding, hard acceleration and hard braking lower fuel economy by roughly 15–30% at motorway speeds and 10–40% in stop-and-go traffic, and fuel economy usually drops quickly above about 80 km/h (fueleconomy.gov).
What Wialon shows: the Eco Driving report scores each driver on speeding, acceleration, braking and cornering, using the tracker’s accelerometer or speed data. A speed notification flags trips over a fixed limit or over the road’s limit from the map.
What to do: compare drivers only within groups that do similar work, and talk through the top deviations once a week.
Route deviations and extra kilometres
Every kilometre driven off the job costs fuel: a detour, a private errand, a second trip to a site that could have been one visit.
What Wialon shows: the driven track against the planned route and its check points, visits to geofences around customer sites and depots, and mileage per trip. Route progress notifications flag skipped points and delays.
What to do: compare planned and driven kilometres per vehicle each month and look into the vehicles with the largest gap.
Fuel drains and refuelling mismatches
Fuel that leaves the tank without moving the vehicle is the cost that telematics finds most directly.
What Wialon shows: the fuel level from a capacitive tank sensor or from CAN, and Fuel fillings and Fuel drains tables with time, place and volume for each event. A fuel drain notification flags each detected drain. Fuel card transactions can be compared with the fillings the sensor recorded.
What to do: check every drain and every mismatch above your tolerance. Accurate results depend on calibration, covered in Step 3 and on the fuel monitoring page.
Maintenance that affects consumption
Some wear shows up in the fuel bill before it shows up in the workshop. Tyre pressure is the simplest example: fuel economy drops by about 0.2% for every 1 psi (about 0.07 bar) fall in the average pressure of all tyres, and the wrong grade of motor oil can cost 1–2% (fueleconomy.gov).
What Wialon shows: mileage and engine hours per vehicle, with a maintenance notification when a service interval is due. Consumption per 100 km by vehicle shows which unit uses more fuel than others in its group.
What to do: service by mileage and engine hours, and send a vehicle whose consumption rises against its group for inspection.
Field service fleets
Vans and cars that visit customers burn fuel in a different pattern from long-haul trucks. Most of the waste sits in short stops with the engine running, in the distance between jobs and in vehicles used outside working hours.
- Idling at job sites: engines left on to heat or cool the cab or to power equipment. Wialon lists these stops per site and per technician.
- Dispatch: the live map shows which technician is closest to a new job, which cuts the kilometres driven to reach it.
- Job order: the trip history shows days where a technician crossed the same area twice.
- Private use: trips outside working hours appear in the reports. Where the company allows private use, a private mode keeps the trip and its distance while leaving the route out.
- Fuel cards: light vehicles rarely get a tank sensor, so the check is consumption per 100 km from CAN or OBD compared with what was bought on the card.
Step 1: measure the baseline before changing anything
This is the most commonly skipped stage and the most regretted one. Without a baseline, in six months there is no way to separate the effect of the rollout from seasonality, fuel price movement or a different mix of jobs.
The minimum baseline set, all obtainable from invoices and spreadsheets before installation:
- fuel cost per vehicle over twelve months,
- annual mileage per vehicle,
- number and cost of unplanned repairs,
- hours spent monthly on reporting and settlement.
The last line is often a surprise. In fleets of 30–50 vehicles, manually reconciling refuelling, mileage and routes can take several working days a month — a real cost that appears in no budget.
Step 2: three metrics to start
The platform will calculate dozens. The team will change behaviour on three:
- Consumption per 100 km within a group of comparable vehicles.
- Idle minutes per shift, per vehicle and per driver.
- Share of empty running in total kilometres.
The condition for any of this to mean anything is segmentation. Split the fleet into groups with similar duty cycles — urban, domestic, international, refrigerated, ADR — and compare only within groups. A ranking that mixes profiles will be dismissed by drivers as unfair, and they will be right.
Step 3: fuel — fastest return, most pitfalls
Fuel measurement produces the largest single effect and is also the most sensitive to configuration mistakes.
Choosing the data source. A CAN or OBD reading is sufficient in cars and light commercial vehicles. In trucks with large tanks the factory gauge is too coarse for billing, so a capacitive level sensor goes into the tank.
Calibration. An uncalibrated sensor generates false alarms, and a month of those teaches the team to ignore notifications. Calibration plus two to four weeks of observation before alerts reach the team is not optional — it is the condition for the system working at all. More on this on the fuel monitoring page.
Reconciliation against fuel cards. A 300-litre transaction against a 240-litre increase in tank level is a signal that needs explaining — sometimes a calibration error, sometimes fuel going into another tank. Automated comparison belongs in the monthly close, not in a quarterly review.
Step 4: idling — change without investment
Reducing idle time requires no hardware beyond the device already in the vehicle. It requires three things:
- measurement — minutes per shift, per vehicle,
- a threshold set separately per work type, because a reefer and an urban distribution van have different legitimate minimums,
- feedback — a weekly summary visible to drivers.
Measurement without feedback changes nothing. Feedback without a sensible threshold changes the wrong things: a reefer driver who shuts down the unit to improve their score creates a cost many times larger than the fuel saved.
Step 5: a weekly rhythm, not a quarterly report
| Day | Action | Time |
|---|---|---|
| Monday | Review KPIs and deviations from the past week | 30 min |
| Tuesday | Decisions: route corrections, driver conversations, service requests | — |
| Wednesday–Friday | Execution and follow-up | — |
Three conditions make this work: one person leading the review, one dashboard instead of twenty reports, and authority to decide without escalation. Missing the third is the most common reason rollouts stall at “we have the data”.
Step 6: from cost to profitability
Telematics stops being a cost line at the point where its data joins the system in which the company counts money. Only then can you answer:
- Which customer is profitable once empty runs to their site are counted?
- Which lane loses money at current rates?
- What does serving an order actually cost, as opposed to the quoting calculator’s version?
The simplest start is an automated export of mileage and fuel cost into the ERP — typically two to four weeks of work, with the immediate effect of removing a monthly manual summary. The sequence is covered in the article on Wialon–ERP integration.
Calculating the return honestly
Three numbers, compared after six months:
- Baseline cost — fuel, unplanned repairs, hours spent on reporting, over the twelve months before rollout.
- System cost — devices, installation, connectivity, licences, annualised. The breakdown is on our pricing page.
- The change — the same lines after six months, adjusted for external factors: fuel price movement and changes in job volume.
The third point is what separates a credible calculation from a sales deck. An 8% fall in fuel cost against a 6% fall in wholesale prices is a 2% effect from the rollout, not an 8% one.
Six mistakes that raise costs instead of cutting them
- No metric owner — a report nobody has to open will not be opened.
- Too many reports — twenty summaries produce zero decisions.
- No fleet segmentation — conclusions drawn from route differences attributed to people.
- Alerts with no reaction process — notifications landing in a filtered folder.
- Skipped baseline — no way to prove the effect, and therefore no way to defend the budget next year.
- Rollout without talking to drivers — resistance that costs more than the system.
Summary
The financial outcome of a telematics rollout is a function of process, not sensor count. Three metrics, one owner, a weekly rhythm and an honest baseline achieve more than a complete feature set used once a quarter.
To size the opportunity for your own fleet, start with a baseline measurement and a pilot on 10–20 vehicles — the step-by-step plan is in the article on GPS fleet tracking rollout.
Frequently asked questions
How much can telematics realistically cut fleet costs?
It depends entirely on the starting point. In fleets with no prior measurement the largest gains come from idling and fuel losses, because both change quickly and are easy to measure. In fleets that already report well the room is narrower and shifts towards route planning and customer profitability. Only a baseline measurement gives a credible number.
Where do we start with a fleet spread across the country?
With a pilot on one vehicle group and one route type. Geographic spread complicates installation, not analysis. Confirm that the metrics and the reaction process work on fifteen vehicles first; doing it the other way round replicates configuration mistakes across the whole fleet.
Is monitoring alone enough to bring costs down?
No. The system surfaces deviations; costs fall when somebody acts on them. The weakest link is almost always the absence of a person with authority to decide, not the absence of data.
How do we calculate the return on telematics?
You need three numbers: the baseline cost before rollout, split into fuel, unplanned repairs and hours spent on reporting; the annual cost of the system; and the change in those lines after six months, adjusted for external factors. Without a baseline, any return figure is an estimate — which is why data collection should start before installation.
Do eco-driving bonuses actually work?
They do, on two conditions: the metrics must be visible and comparable within the same group of vehicles and routes. A ranking where an urban van driver competes with a long-haul driver will be dismissed as unfair, and rightly so.
How do you reduce fleet fuel costs with telematics?
Measure five things and act on them every week. Idle time per vehicle and driver, speeding and harsh driving scores, planned against driven kilometres, fuel drains and fuel card mismatches from a calibrated tank sensor, and consumption per 100 km within each vehicle group as a sign of maintenance problems. Start with a baseline of fuel cost per vehicle, so you can show the change after six months.
How does telematics reduce fuel costs for field service fleets?
In field service most fuel is lost to engines left running at job sites, to the distance between jobs and to vehicles used outside working hours. Telematics shows idle time per site and per technician, lets dispatch send the closest technician to a new job, shows days where a technician crossed the same area twice, and compares fuel card purchases with consumption per 100 km.
How does construction telematics help reduce costs?
Machines on a construction site are measured in engine hours. Telematics shows how many of those hours were idle, how much fuel each machine used from a tank sensor or CAN data, and which machines stood unused on site. That supports decisions on idling rules, fuel control, servicing by engine hours and returning or moving equipment that is not working.
By what percentage does telematics cut maintenance costs?
There is no single figure that holds across fleets. The saving depends on how maintenance is planned today, the age of the vehicles and how often they break down. Telematics provides mileage and engine hours per vehicle for servicing by actual wear, and shows vehicles whose fuel consumption rises against their group. Measure the cost and number of unplanned repairs for twelve months before rollout and compare the same lines after.
What does fleet telematics cost?
The cost has five parts. The tracking device, installation, optional sensors such as fuel level probes, a SIM connection, and the platform licence per vehicle. Fuel sensors also need calibration at installation. The current breakdown is on the Asset Track pricing page.